Here is 55 grams of 100% local wool, which I have spun into a singly ply, then dyed with food colors. It's almost what I was aiming for, but I went a little too heavy with the yellow and turned almost all the blue into the bright green tones.
All is not lost however. The next batch of single ply will be all blue, then it will be plied with this to make a strong, bright mitten yarn which will be incredibly warm.
Not one to be defeated by my own stupid mistakes, I made three more cellphone cases yesterday. I am pleased with these. The dark brown one I made first. I was quite happy, except I didn't have quite enough white on the outside of the fringe of the flap. That was my error on layout. The grey one came next and even though the grey is a very coarse, long staple wool, it worked better than I expected. I was happier with the fringe.
I attempted the red wool again. As soon as I wet it, it tried to get away from me again. I have no idea what this wool is .. the staple is short and it's very fine and soft. I'd guess merino, but not sure. I was able to control the wool but you can see this one is a bit wider than the others. A tiny bit of the red solidified and didn't stick on the front so I snipped it off. Not sure what happened there either, except I think it might have folded off initially on the bottom side where I couldn't see it, during the beginning stages. I also dared to cut some holes in the flap with pleasing results. I found out these holes can get a lot larger in a big hurry where the wool is very thin. More valuable knowledge for the data base in my brain.
I was really happy with the flame look of the red flap. I don't know what kind of wool the yellow is either. It's a long staple a slightly coarser than the red. I got both at a fabulous price on EBay in large amounts. I imagine it is left overs from the International Day of Felt project quite some time ago as this was themed in red and yellow colors. In any case, it was inexpensive and I have a lot of it.
This is the sketch I have ready for my first handbag. I'm waiting on an order of four colors of dyed Corridale top from Louet in Quebec and a sampler of Angelina fibers from the states. Once those treasures arrive, I think I'm ready to dive into handbag production. The little cases were a great experience, but I just fell in love with the handbag concept and can't wait to try it.
This is the completed mask which will be a gift for a dear friend, to add to her collection. As I worked with this, and the face evolved, a female persona developed. I believe she is a guardian of marine shorelines; places where salty surf collides with rock and sand, eroding and providing new substrate for new life. I also think she is the first of a series of these masks.
I learned a lot about the wool with this project, as it was full of challenges. No wet felting techniques were used so it had to be needle felted to a very stiff stage, in order for it to hold it's form. I fashioned a mold to work on, using styrofoam and masking tape, which I wrapped in plastic food wrap in order to keep the bits of styrofoam from getting into the wool. When it was stiff enough, I sewed a wire frame to the inside, which I made by using the same mold. The end result is worth the frustration. I'm very pleased with it and I'm anxious to begin another very soon. The amount of felting required has created a sore shoulder, so I'm going to catch up on some other things for a day or two. I'm also fighting a stubborn cold. Being Easter weekend, I have no other plans so will rest as much as I can and try to get well.
